Need help?Do you have a question about the Samlexpower SEC-1235 and is the answer not in the manual?
General| Brand | Samlexpower |
|---|---|
| Model | SEC-1235 |
| Category | Power Supply |
| Language | English |
Warning regarding electrical shock hazard and advice not to open the unit.
Explanation of safety symbols used in the manual for warnings and information.
General guidelines for safe use, handling, and maintenance of the power supply.
Instructions for proper grounding of the power supply to reduce electric shock risk.
Caution against direct connection to batteries for charging or backup without proper external components.
Diagram and dimensions detailing the physical layout of the SEC-1235 model.
Diagram and dimensions detailing the physical layout of the SEC-1235M model.
Overview of the SEC-1235/SEC-1235M switched mode power supplies and PWM control.
Highlights of the power supply's capabilities, including efficiency, protection, and compliance.
Details on the fan operation and automatic shutdown mechanism triggered by high temperatures.
Guidelines and warnings regarding the use of the power supply for battery charging or backup.
Critical safety instructions and recommendations for installing the power supply unit.
Reference to diagrams showing the required space and mounting dimensions for installation.
Requirements for the installation environment, including temperature, ventilation, and dryness.
Guidelines on how to orient the unit during mounting for safety and optimal performance.
Instructions for connecting the power supply to AC power sources, including voltage settings.
Details on the DC output terminals and recommended methods for connecting wiring.
Step-by-step guide on how to safely power on the power supply and connect the DC load.
Step-by-step guide on how to safely power off the power supply and disconnect the DC load.
Warning about potential radio frequency interference and measures to mitigate it.
Explanation of unintentional RF noise sources in Switched Mode Power Supplies.
Methods for filtering conducted RF noise to meet regulatory standards.
Addressing excessive RF interference caused by incoming signals affecting power supply operation.
Additional guidelines and recommendations for reducing radio frequency noise.
Information on how SMPS leakage currents can affect GFCI breakers and solutions.
To Next Page
