14
X12D X15D
Output Power
Low Frequency
RMS Power 400 W @ 8 ohms
Peak Power 800 W @ 8 ohms
THD < 1 %
High Frequency
RMS Power 100 W @ 8 ohms
Peak Power 200 W @ 8 ohms
THD < 1 %
Transducers
Low Frequency 12” bass transducer, 2.5” voice coil 15” bass transducer, 3” voice coil
High Frequency 1.34” (34 mm) titanium compression driver, edge-wound copper voice coil
Acoustic Performance
Frequency Response (-3 dB) 58 Hz to 20 kHz 55 Hz to 20 kHz
Maximum SPL (Peak Power) 125 dB SPL @ 1 m 125 dB SPL @ 1 m
Horizontal Coverage Angle 90°
Vertical Coverage Angle 60°
Electronic Crossover
Crossover Type 24 dB/oct Linkwitz-Riley
Crossover Frequency 2.3 kHz 2.1 kHz
Input/Output
Inputs Balanced XLR & ¼” Connectors (Input 1 Mic/Line Level; Input 2 Line Level)
Output Balanced XLR Line Output
Equalization Switches
HPF Flat, 80Hz, 120Hz
EQ Flat, Deep, Boost
Power Supply
Power Consumption 456 W max.
AC Connector 3-pin IEC 250 VAC, 20 A male
Fuse 100 - 127 VAC T6.3AH / 250 V
220 - 240 VAC T3.15AH / 250 V
Dimensions and Weight
Dimensions in 14” L x 10.8” W x 21.5” H 17.75” L x 13.5” W x 27.5” H
mm 356 mm L x 275 mm W x 546 mm H 450 mm L x 342 mm W x 698 mm H
Weight lbs 28.5 41.5
kg 12.8 19
Mounting
Mounting Method Integral 1 3/8” Pole Mount Receptacle
Fly Point 1 x M10
Specications
At Samson, we are continually improving our products, therefore specifications and
images are subject to change without notice.
To Next Page
Loading...
