Auro X12D/X15D
11
Using a Microphone
• Be sure that the Auro X12D/X15D Power switch
is set to the off position.
• Turn the LEVEL control fully counterclockwise to
the off position.
• Connect the power cable to an AC socket.
• Using a standard XLR cable, plug a microphone
into the Auro’s XLR INPUT 1.
• Set the MIC/LINE switch to the MIC (down)
position.
• Set the MIX 1/2 & THRU switch to the MIX 1/2
position.
• Switch the Power switch to the ON position.
• While speaking or singing into the microphone,
slowly raise the LEVEL control until you have
reached the desired level.
• For larger sound reinforcement you can run
several monitors using the Line Output to daisy-
chain one Auro to another.
Making Connections
Using a Stereo Line Level Signal
• Be sure that the Auro X12D/X15D Power
switch is set to the off position.
• Turn the LEVEL control fully counterclockwise
to the off position.
• Connect the power cable to an AC socket.
• Using standard XLR or ¼” cables, connect the
line level signals from a mixer or keyboard into
the Auro Inputs.
• Switch the Power switch to the ON position.
• Now, run an audio signal from your mixer (like
music from an MP3 player) while slowly raising
the Auro’s Level control until you have reached
the desired level.
To Next Page
Loading...
Need help?
General