Need help?Do you have a question about the Samson expedition xp1000 and is the answer not in the manual?
General| Type | Portable PA System |
|---|---|
| Speaker Configuration | 2-way |
| Mixer | Yes |
| Bluetooth | Yes |
| Woofer Size | 10" |
| Frequency Response | 50Hz-20kHz |
| Sensitivity | 95 dB |
| Power Output | 1000 Watts |
| EQ | 3-band EQ |
Warns about electric shock risks and the need for qualified service.
Explains warning symbols and provides guidance on product disposal.
Provides a comprehensive list of safety guidelines for operating the equipment.
Details compliance with FCC rules and RF exposure requirements.
Details the mixer's input jacks, MIC/LINE switches, and LIMIT/COMP controls.
Explains HIGH/LOW EQ, EFFECTS switch, and LEVEL controls for each input channel.
Describes stereo inputs, MONITOR OUT, REC OUT, and SPEAKER OUT jacks.
Details power switch, speech/music modes, and Bluetooth pairing indicators.
Covers master volume, metering, Bluetooth status, indicators, and phantom power.
Instructions for detaching the mixer and securing the accessory compartment cover.
Guidance on positioning speakers and connecting them to the mixer using provided cables.
Guides through initial power connection, speaker wiring, and audio source hookup.
Instructions for switching on the XP1000 and connected equipment.
How to adjust channel and master volume controls for desired audio levels.
Guides on using limiter, effects, and EQ for fine-tuning the sound output.
Step-by-step guide to adding digital effects to input channels.
Provides tips and techniques to prevent unwanted howling or squealing.
Guides on connecting the receiver and installing batteries in the transmitter.
Details the process of pairing the transmitter and receiver and adjusting gain levels.
Details wiring for unbalanced, balanced 1/4", and 3.5mm stereo connectors.
Explains wiring for XLR balanced and RCA connectors.
To Next Page