Need help?Do you have a question about the Samson Expedition XP112a and is the answer not in the manual?
General| Type | Active PA Speaker |
|---|---|
| Max SPL | 126 dB |
| Outputs | XLR |
| Speaker Size | 12 inches |
| LF Driver | 12 inches |
| HF Driver | 1 inch |
| Frequency Response | 50Hz - 20kHz |
| Inputs | XLR |
| Amplifier Power | 500W RMS |
| Weight | 15.4 kg (34 lbs) |
Guidelines for apparatus handling, placement, cleaning, and installation to prevent damage or hazards.
Instructions regarding electrical safety, servicing by qualified personnel, and fuse replacement.
Details on obtaining warranty service, return authorization, and contact information for support.
Details on the key features of the Samson Expedition powered loudspeakers.
Step-by-step guide for setting up and operating the Expedition loudspeakers for initial use.
Description of input jacks, sensitivity controls, link output, volume, and signal indicators.
Details on the power indicator, AC inlet, fuse holder, and power switch.
Step-by-step instructions for connecting a dynamic microphone to the loudspeaker.
Instructions for connecting stereo line level signals from a mixer or keyboard.
Guidance on raising speakers for audience coverage and using speaker stands.
Instructions on using the loudspeaker as a wedge monitor for stage use.
To Next Page