Need help?Do you have a question about the Samson Expedition EX10 and is the answer not in the manual?
Details the passive 8-ohm EX10 enclosure and its compatibility with external amplifiers.
Describes the powered EX20 with bi-amped cell, active crossover, and built-in limiter.
Covers the all-in-one EX30 with a four-channel mixer, digital effects, and stereo mixer.
Highlights the active subwoofer with 500W amp and 15" driver for enhanced low-end.
Lists optional accessories including mounting brackets, battery cartridges, and cassette recorders.
Explains the connectors, controls, and switches on the EX10 unit.
Illustrates single and multiple EX10 unit connection setups.
Details the connectors, controls, VU meter, power, and limiter on the EX20.
Shows single and multiple EX20 unit connection configurations.
Explains the EX30's mixer controls: EQ, reverb, pan, volume, inputs, outputs, and switches.
Illustrates connection setups for single EX30 and combined EX30/EX20 systems.
Provides advice on optimal speaker placement, tilt-back use, and maximizing coverage.
Details on using the 1-3/8" stand mount socket for elevating the speaker.
Describes installing MP 1030 brackets and OmniMounts for flying or wall/ceiling mounting.
Explains the prewired compartment for Samson wireless receivers in EX20/EX30.
Guides on TD30 controls: transport, level meter, record/play level, and pitch control.
To Next Page
General