Samson Expedition XP112a - Specifications

XP112a XP115a
Output Power
500 Watts Peak (400 LF + 100 HF)
250 Watts RMS (200 LF + 50 HF)
Low Frequency 12” Woofer, 2” Voice Coil 15” Woofer, 2” Voice Coil
High Frequency 1” Neodymium Driver, 1” Voice Coil
Frequency Response 60Hz - 20KHz 50Hz - 20kHz
Max. SPL (1M) 119dB 121dB
Limiter Optical
Horn Coverage 90°H x 60°V
Crossover Frequency 2.5KHz-at 12dB/Oct
Inputs Balanced XLR / ¼” Mic/Line Connectors
Output Balanced XLR Line Output
Contour Equalization 100Hz & 12K Hz Boost
Electronic Protection Thermal, Overload, Analog limiter, Compressor
Power Consumption 260 W
AC Connector 3-pin IEC 250 VAC, 20 A male
Fuse 110V-120V T4A AC250V; 220V-240V T2A AC250V
Enclosure Polypropylene, Metal grille, Rubber feet, 3* Handles
Dimensions (LxWxH) 15” x 12.9” x 23.9”
380mm x 327mm x 606.5mm
15.2” x 14” x 24.9”
386mm x 356mm x 631.5mm
Weight 30.8lb / 14kg 32.6lb / 14.8kg
Mounting Method Integral 1 3/8” Pole Mount Receptacle
Specications
11Expedition XP112/XP115