18
Plug the RXD1 USB receiver into
the Channel 4 USB jack labeled
WIRELESS.
On the wireless handheld transmitter,
unscrew the bottom section of
the microphone by turning it
counterclockwise and then slide it off.
Place a fresh set of AA (LR6) batteries
in the transmitter battery holder,
taking care to observe the polarity
markings, then replace the cover.
Turn the channel 4 LEVEL knob
on the XP1000 completely
counterclockwise to 0, then turn the
POWER siwtch on the XP1000 to the
ON position.
Turn on the power to the transmitter
by pressing and holding Power switch;
the indicator LED will light amber.
Stage XPD1 Wireless System (Optional)
To Next Page
Loading...
