Samson C-que 8 User Manual

ENGLISH
8

The C•que 8’s Headphone Output jack accepts a standard 1/4” TRS connector for easy interface with most
professional headphones. Once the master VOLUME has been set, the channels output level is set by the
VOLUME knob.

Each of the four C•que 8 channels features an EQ SHAPE
switch allowing individual equalization contour for each
channel. When the EQ SHAPE switch is in, the LED will
illuminate indicating the EQ SHAPE circuit is engaged.
The EQ SHAPE circuit provides a pre-set equalization
curve designed to sound good on most program music.
In this mode, the low frequencies have a 6dB boost at
100Hz and the high frequency are boosted 6dB at 12kHz.
When the EQ SHAPE switch is in the out position, fre-
quency response of the channel is flat.

The channel VOLUME control is used to adjust the channel headphone output. The volume control will
adjust the level of the front panel headphone outputs, as well as that channel’s rear panel headphone out-
puts.

Each C•que 8 Channel has an 6 segment, LEDlevel meter which monitors the output of the channel in
Decibels (dBs) –24 toOL (overload). If the LEVEL meter displays an OL signal, then turn down the channel
VOLUME, and if necessary, also turn down the master VOLUME .
MAIN
INJECT
VOLUME BALANCE
2 CH
STEREO
SHAPE
OUT
SHAPE
OUT
CH 1
OL
0
-6
-12
-18
-24
OL
0
-6
-12
-18
-24
CH 1
CH 2
SHAPE
OUT
SHAPE
OUT
OL
0
-6
-12
-18
-24
CH 3 CH 4
4 CHANNEL
HEADPHONE AM
P
CH 2
CH 3
CH 4
VOLUME
VOLUME
VOLUME
VOLUME
0 10
0 1
0
0 1
00 10 L R
0 1
0

1
2
3
4
5
6
8
7
9
1
2
3
4
5
6
8
7
9
1
2
3
4
5
6
8
7
9

1
2
3
4
5
6
8
7
9
1
2
3
4
5
6
8
7
9
1
2
3
4
5
6
8
7
9
1
2
3
4
5
6
8
7
9
1
2
3
4
5
6
8
7
9

Samson C-que 8 Specifications

General

Brand	Samson
Model	C-que 8
Category	Amplifier
Language	English