Need help?Do you have a question about the Samson Q5 and is the answer not in the manual?
General| Type | Headphone Amplifier |
|---|---|
| Input Impedance | 10kΩ |
| Output Impedance | 10Ω |
| Frequency Response | 20Hz-20kHz |
| Signal-to-Noise Ratio | >100dB |
| Channels | 2 |
| Total Harmonic Distortion | < 0.001% |
| Weight | 0.75 lb |
| Inputs | 1 x 1/4" TRS, 1 x RCA |
| Outputs | 1/4" stereo jack |
Adjusts input signal level and controls power on/off.
Indicates the operational status of the unit.
Allows switching between mono and stereo signal playback.
Controls the individual volume level for each headphone output.
Standard 1/4" stereo jacks for headphone connections.
Connection point for the AC power adapter.
Specifies the dedicated 16-volt AC adapter for the Q5.
Jacks for linking multiple Q5 units together seamlessly.
Receives the incoming audio signal, balanced or unbalanced.
To Next Page
