EasyManua.ls Logo

Samson Mixer S62 User Manual

Samson Mixer S62
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
• 6 balanced mic/line-input channels.
• Independent CD/tape input; signal is routed via
channel EQ.
• Power: 150 W into 4 ohms.
• Built-in 3-spring reverb.
• 2-band equalization on all channels.
• 5-band graphic master EQ.
• Master peak LED.
• 1 Aux send per channel.
• 1 Aux return with front-panel level control.
• 48 V phantom power selectable for mic input
connectors.
• Protection relay circuitry to prevent noise when
powering on.
• 2 speaker outputs.
• Extremely portable format with carry handle and
protective corners.
• Rackmountable with rack ears included.
• Rear-panel amp in and preamp output.
Master reverb level control.
S62
AMPLIFIER
MIXER
The S62 Mixer Amplifier is a monophonic 6-input
mic/line mixer with a dedicated power amp producing
150 W into 4 ohms. Highly portable or easily installed
into a rack, the S62 is equipped with 2-band equalization
on each channel and a 5-band graphic EQ on the main
output. The S62 is an ideal all-in-one device for recording,
live concert and contracting applications. It also features
6 electronically balanced mic/line inputs (XLR-type and
1/4
connectors), a CD/tape input (phono connectors),
switchable 48 V phantom power, internal reverb, an Aux
send and return, along with amp in and preamp and
monitor out patch points.
FUSE
SAMSON
CAUTION
AVIS:
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
NOTICE:
ALL MIC INPUT XLR PHANTOM
POWERED.
AUX
SEND
AUX EFFECT
RETURN
PRE-OUTAMP IN
S62 MIXER AMPLIFIER 150 WATTS 4
CD/TAPE IN
L
R
(<75+4dBu) (<75+4dBu)
(10K-10dBu)
~AC INPUT
120V,60Hz
135W
SPEAKER
OUTPUT
MIN 4
FUSE
5A/250V
POWER
(10K+4dBu)
S / N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
ON
OFF
(1oK+4dBu)
+10
0
-15
+15
+10
0
-15
+15
+10
0
-15
+15
+10
0
-15
+15
AUX REVERB
LEVEL
HIGH
LOW
+10
0
-15
+15
+10
0
-15
+15
AUX REVERB
HIGH
LOW
+10
0
-15
+15
+10
0
-15
+15
AUX REVERB
LEVEL
HIGH
LOW
+10
0
-15
+15
+10
0
-15
+15
AUX REVERB
LEVEL
HIGH
LOW
+10
0
-15
+15
+10
0
-15
+15
AUX REVERB
LEVEL
HIGH
LOW
+10
0
+10
0
+10
0
CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 4
CHANNEL 5
CHANNEL 6
SAMSON
RETURNS
S62 MIXER AMPLIFIER
MAIN LEVEL
AUX EFFECT
REVERB
AUX REVERB
LEVEL
HIGH
LOW
LINE
LINE
LINELINELINELINE
MIC
MIC MIC MIC MIC MIC
+15db
-15db
0dB
30Hz 120Hz 480Hz 2Khz 8Khz
8Khz
2Khz
480Hz120Hz30Hz
+15db
-15db
0dB
TAPE IN
CH 6
PROTECT PEAK POWER
LEVEL
Contact:
Samson Technologies Corp., P.O. Box 9031, Syosset, NY 11791-9031 Phone: (516) 364-2244 Fax: (516) 364-3888 www.samsontech.com
Question and Answer IconNeed help?

Do you have a question about the Samson Mixer S62 and is the answer not in the manual?

Samson Mixer S62 Specifications

General IconGeneral
BrandSamson
ModelMixer S62
CategoryAmplifier
LanguageEnglish

Summary

S62 Mixer Amplifier Overview

Product Description and Features

Details the S62's 6-channel mixer, 150W amplifier, 2-band EQ, graphic EQ, reverb, and connectivity options.

Portability and Rackmount Design

Highlights the unit's portable format, carry handle, protective corners, and rackmount capability.

Technical Specifications

Mixer and Preamp Section Specifications

Covers THD, SNR, voltage gain, tone controls, EQ, and noise levels for the mixer/preamp.

Power Amplifier Section Specifications

Details output power, THD, SNR, frequency response, and idle current for the power amplifier.

General Product Specifications

Includes physical dimensions, weight, power requirements, and power consumption details.

Related product manuals