To Next PageTo Next Page
Need help?Do you have a question about the Samson SERVO 200 and is the answer not in the manual?
Essential safety instructions for operating the equipment to prevent hazards.
Explains the protection relay's role and the initial power-up muting.
Lists conditions that trigger protection: overheating, overcurrent, shorts, DC voltage.
Crucial warning to use only 8-ohm loads in bridge mode to prevent damage.
General| Damping factor | 280 |
|---|---|
| Amplifier class | A/B |
| Frequency range | 20 - 20000 Hz |
| Audio output channels | 2.0 channels |
| Peak power per channel | 100 W |
| Signal-to-Noise Ratio (SNR) | 102 dB |
| Total Harmonic Distortion (THD) | 0.05 % |
| RMS power output per channel (8 Ohm) | 66 W |
| Bridge-mode power output per channel (8 Ohm) | 200 W |
| Headphone connectivity | 6.3 mm |
| Speakers connectivity type | 6.35 mm / RCA |
| Purpose | - |
| Product color | Black |
| Connectivity technology | Wired |
| AC input voltage | 115-230 V |
| AC input frequency | 50 - 60 Hz |
| Power protection features | Over current, Overheating, Short circuit |
| LED indicators | Yes |
Weight and Dimensions| Depth | 297 mm |
|---|---|
| Width | 483 mm |
| Height | 89 mm |
| Weight | 6820 g |
