Samson S700 - User Manual

®
OWNERS MANUAL
POWER
AMPLIFIER
S1000 / S700
PROTECTION PROTECTIONPOWER
CHANNEL 1 CHANNEL 2
-40db -20db CLIP
0dB
-80dB
-30dB -10dB
-20dB
o
OFF ON
-40db -20db
CLIP
SAMSON
0dB
-80dB
-30dB -10dB
-20dB
S1000
500W X 2 STEREO
PROTECTION PROTECTIONPOWER
CHANNEL 1 CHANNEL 2
-40db -20db CLIP
0dB
-80dB
-30dB -10dB
-20dB
o
OFF ON
-40db -20db
CLIP
SAMSON
0dB
-80dB
-30dB -10dB
-20dB
S700
350W X 2 STEREO

Samson S700 Specifications

General

Channels	2
Connectors Input	XLR, 1/4" TRS
Input Impedance	20k Ohms
Connectors Output	Binding Posts
Dimensions	483 x 88 x 380mm (19" x 3.5" x 15")

Summary

Introduction

S700; S1000 Features

Guided Tour - Front Panel

Guided Tour - Rear Panel

Setting Up and Using Your S700; S1000

The S700; S1000 Protection Circuitry

Bridged and Parallel Modes

Bridged Mode

Explains how the amplifier operates in Bridged mode, doubling power output for an 8-ohm load.

Parallel Mode

Describes Parallel mode, routing Channel 1 signal to both channels for dual mono output.

S700; S1000 Connections

Stereo Mode Connections

Details speaker and Speakon™ connections for stereo operation with two or four speakers.

Bridged Mode Connections

Illustrates speaker and Speakon™ wiring for single-speaker bridged operation.

Parallel Mode Connections

Using the S700; S1000 Link Connectors

Specifications