Samson Q5 User Manual

Specifications
1. Power 500 mW x 5 channel
2. Inputs
Type: Low-Z balanced
Transformerless
Input impedance: 10K ohms
Maximum input level: +18dBV
Connector: 3-Conductor 1/4”
(tip-ring-sleeve)
3. Indicators
Power Red LED indicators power “On”
4. Frequency Response 20 Hz to 20 kHz, +0 dB > -1 dB
5. THD .003%
(1 kHz, 0 dBm, 600 ohms)
.006%
(1 kHz, 24 dBm, 600 ohms)
6. Signal to Noise Ratio 95 dB
7. Gain 20 dB
8. Outputs
Type: Low-Z balanced
Output impedance: 160 ohms typical
Maximum output level: 24 dBm / 600 ohms
Connectors: 1/4” Stereo (x 5)
9. Minimum impedance 8 ohm
10. Power requirements 16 volts AC, 1.2 amperes
11

Samson Q5 Specifications

General

Brand	Samson
Model	Q5
Category	Amplifier
Language	English