Samson CM11B - CM11 B Installation

CM11B Installation
The CM11B can be installed on just about any flat surface. Simply place the unit on a conference table, alter
or sound stage. For mounting flush to a wall or ceiling, you can use the mounting holes provided on the rear
of the microphone. Take care not to cover the any part of the mic element with your hand or any other object.
Also, be aware of a phenomenon called the proximity effect, as explained on page 4, which causes a notice-
able change in the frequencies response of the microphone.
7
CM11B_ownman.indd 9 1/17/05 9:54:05 PM