Samson CO1U - Getting Started with MAC os X

3
ENGLISH
The following example is for setting up the
The following example is for setting up the
The following example is for setting up the
C01U in MAC OS X .
1. Plug in microphone. The LED will light
to indicate it is receiving USB power. The
to indicate it is receiving USB power. The
MAC will recognize the USB audio device
MAC will recognize the USB audio device
and automatically install a universal driver.
and automatically install a universal driver.
2.To select the C01U as the computers
2.To select the C01U as the computers
audio input, open the System Preferences
audio input, open the System Preferences
from the dock or the main Apple Menu
from the dock or the main Apple Menu
(figure 1).
(figure 1).
3. Next open the Sound preference (figure
3. Next open the Sound preference (figure
2).
2).
4. Now, click in the Input tab and select
4. Now, click in the Input tab and select
C01U
C01U
(figure 3).
At this point you can begin using your micro-
At this point you can begin using your micro-
At this point you can begin using your micro-
phone, or if you want, you can use the C01U's
phone, or if you want, you can use the C01U's
phone, or if you want, you can use the C01U's
expanded software features by loading the
expanded software features by loading the
C01U driver as described in the following
C01U driver as described in the following
section,
section,
Using the C01U
Driver
Software "
on
page 9 of this manual.
page 9 of this manual.
page 9 of this manual.
Figure
Figure
2
2
Figure
Figure
1
1
Figure
Figure
3
3
Getting Started with MAC OS X