db1500a and dB1800a Connections
XLR Balanced Wiring Guide
The dB1500a and dB1800a’s input and outputs utilize industry standard XLR connectors. Below is a detailed wiring dia-
gram for the dB1500a and dB1800a XLR connectors.
dB1500a and dB1800a XLR WIRING DIAGRAM
CASTER INSTALLATION
• Locate one caster and four each of the
supplied screws and lock washers.
• Hold the caster in place and hand start
the screws. Be careful to ensure that the
screws are on the proper thread chase.
DO NOT PUSH TEE NUT INTO ENCLOSURE.
• Use a screw driver to tighten the
four screws. Be careful not to over
tighten the screws.
• Repeat the steps above for the remaining
three casters.
ENGLISH
11
To Next Page
Loading...
