5DE50x Headset Microphone
The headset can be re-sized by sliding the
ear hooks to fit snug around your head. If the
DE50x is loose and will not stay in place, slide
the ear hook wires back for a tighter fit.
Adjust the microphone position by holding the
left ear hook wire and slide the boom forward or
back. For optimum performance the microphone
should be close to the skin and towards the
corner of the mouth, approximately a half inch
away.
Position the moisture guard ring as close to the
capsule as possible.
For outdoor use and to help reduce p-popping,
install one of the included windscreens.
Fitting the DE50x Microphone
To Next Page
Loading...
