8
• Set the Express+ power switch to the OFF position, and fully turn all of the LEVEL
controls counterclockwise to 0.
• If an outlet is available, connect the included power adapter to the DC input of the
speaker, and plug it into an electrical outlet.
• Connect your audio sources.
• Set the Express+ power switch to the ON position.
• Turn the channel Volume controls up and set the input levels, following the steps below.
Making Connections
Microphone Input
• Connect a microphone using a balanced XLR
microphone cable.
• While speaking or singing at performance
level into the microphone, slowly raise the
channel MIC/LINE VOLUME control until you
have reached the desired level.
NOTE: If not using the Mic Input, turn the MIC/
LINE VOLUME control all the way down to keep
out any unwanted noise.
Aux Input
• Connect a line level device using 1⁄8”
(3.5mm) cable.
• Set the output volume of your audio device to
it's maximum setting.
• While playing music from a line level audio
source, slowly raise the AUX/BLUETOOTH
VOLUME control until you have reached the
desired level.
Quick Start
To Next Page
Loading...
