Need help?Do you have a question about the Samson L2000 and is the answer not in the manual?
General| Channels | 20 |
|---|---|
| Type | Analog |
| Outputs - Other | 2 aux sends |
| Aux Sends | 2 |
| Phantom Power | Yes |
Key safety guidelines for operating the audio equipment, covering usage, maintenance, and precautions.
Describes the console's ergonomic enclosure, ample mic/line and stereo inputs, and additional mic preamps.
Covers the onboard 24-bit DSP effects processor, USB interface for recording, and LED metering.
Highlights high-quality mic pre-amplifiers, durable steel construction, and overall sound quality.
Explains the 4 auxiliary sends for monitors/effects and the channel equalizers for tonal shaping.
Details controls for individual input channels including Gain, EQ, Low Cut, Aux/EFX sends, and routing.
Explains the 24-bit digital effects processor and master controls for auxiliary and EFX sends.
Covers Main 2, Phones, Graphic EQ, USB I/O routing, meters, group, and main outputs.
Details XLR, 1/4-inch, and insert connectors for microphones, line-level devices, and stereo signals.
Explains AUX SEND, EFX SEND, CD/TAPE inputs, Record Out, Stereo Return, Main 2 Out, and Group Outs.
Details rear panel connections including Main Out (XLR), Subwoofer Out, USB, and Footswitch.
Explains connecting the L Series via USB, driver installation for Windows and Mac, and initial setup.
Details setting the L Series as the default audio device and adjusting system volume in Windows XP.
Guides setting the L Series as the audio input/output device and adjusting system volume in Mac OS X.
Explains how to route audio signals to and from the computer via USB SEND/RETURN switches.
Illustrates and explains Unbalanced 1/4", Balanced TRS 1/4", XLR, and 1/4" Insert cable wiring configurations.
To Next Page
