Need help?Do you have a question about the Samson TM 500 and is the answer not in the manual?
General| Type | Dynamic |
|---|---|
| Channels | 1 |
| Polar Pattern | Cardioid |
| Impedance | 600 Ohms |
| Connector | XLR |
| Color | Black |
| Sensitivity | -54dBV/Pa (2.0 mV/Pa) |
Overview of the TM500's main features and capabilities.
Visual guide and identification of the TM500's front panel components.
Explanation of mono channel inputs, inserts, peak LED, trim, and equalizer.
Explanation of stereo channel pan, balance, PFL, and fader controls.
Identification of main section inputs/outputs and controls.
Detailed explanation of tape in, aux returns, phantom power, and meter controls.
Explanation of DSP controls, EQ, stereo faders, and headphone features.
Identification and description of rear panel connectors and switches.
Guidelines for using balanced and unbalanced cables and XLR/1/4" connectors.
Illustrates typical audio equipment connections in standard stereo mode.
Illustrates typical audio equipment connections in split mono mode.
Step-by-step instructions for connecting and powering up the TM500.
Detailed guide for establishing optimal input/output levels for minimal noise.
Completing the gain structure setup for microphones and external processors.
Methods to prevent hum and buzz caused by grounding issues.
Explanation of how EQ affects sound frequencies and basic equalization tips.
How to use the seven-band graphic master equalizer for room tuning.
How to use pan controls in mono channels and balance in stereo channels.
How to use auxiliary sends for effects and returns for processing external signals.
Using insert points for external processing on channels and main outputs.
How to select and use the TM500's built-in DSP effects.
List of effects, banks, and parameters for TM500.
List of effects, banks, and parameters for TM500.
Technical specifications for the mixer and pre-amplifier sections.
Technical specifications for the power amplifier section.
To Next Page
