Samson MPL 1640 - Changing the MPL 1640 from Rack-Mount to Tabletop

Changing the MPL 1640 from Rack-mount to Tabletop
The diagrams below show the steps required to convert the MPL 1640 from rack-mount to tabletop usage or vice-versa.
CAUTION: These servicing instructions are for use by qualified personnel only. Refer all servicing to qualified service
personnel.
23
REMOVE COVERPLATE SCREWS
RACKMOUNT ARRANGEMENT
(REAR FACING JACKFIELD)
RACKMOUNT EAR
JACKFIELD
6 SCREWS
COVERPLATE
3 SCREWS
REMOVE
ARMREST
(4 SCREWS)
TABLETOP
ARRANGEMENT
REMOVE
SCREWS
JACKFIELD
6 SCREWS
COVERPLATE
3 SCREWS