Need help?Do you have a question about the Samson MPL 1502 and is the answer not in the manual?
Audio Specifications| frequency response | 17 Hz to 30 kHz ± 1.5 dB at +4 dB |
|---|---|
| equivalent input noise channel 1-5 mic input | -128 dB (A filter, 150 Ω shorted) |
| equivalent input noise channel 1-15 line input | -131 dB (A filter, input shorted) |
| total harmonic distortion + noise | Less than 0.03 % |
| input level channel 1-5 mic input | -50 dBV to +4 dB (10 kΩ, balanced XLR) |
| input level channel 1-15 line input | -40 dBV to +14 dB (10 kΩ, balanced stereo phone jack) |
| input level aux return 1-2 | +4 dB (47 kΩ, unbalanced phone jack) |
| maximum input level channel 1-5 mic input | +17 dB |
| maximum input level channel 1-15 line input | +27 dB |
| trim gain range | 0 dB to +54 dB |
| channel fader range | +15 dB to -80 dB |
| aux send gain range | +10 dB to -75 dB |
| crosstalk ch-to-ch (1 kHz) | -80 dB |
| crosstalk stereo ch L/R (1 kHz) | -65 dB |
| standard output level main out | +4 dBV (balanced, 600 Ω loaded) |
| standard output level aux out | +4 dBV (unbalanced, 2.2 kΩ loaded) |
| standard output level headphones | 150 mW (30 Ω loaded) |
| maximum output main out | +22 dBV (balanced, 600 Ω loaded) |
| maximum output aux out | +22 dBV (unbalanced, 2.2 kΩ loaded) |
| maximum output tape out | +22 dBV (unbalanced, 600 Ω loaded) |
| tone control high | 10 kHz ± 15 dB |
| tone control mid | 800 Hz ± 12 dB |
| tone control low | 80 Hz ± 15 dB |
Weight and Dimensions| dimensions | 13.8 in (w) x 10.4 in (d) x 3.2 in (h) |
|---|---|
| dimensions metric | 350 mm (w) x 264 mm (d) x 82 mm (h) |
| weight | 7.7 lbs • 3.5 kg |
To Next Page
