14
Positioning and Mounting Instructions
Before fly-mounting, wall-mounting or ceiling-mounting the Expedition Pro, you must
first install a Samson MP 1030 mounting bracket to the fly points, as shown in the illus
-
trations on the right
Standard cabling and hardware can then be attached to the MP 1030 mounting bracket in
environments where the Expedition Pro needs to be “flown.”
In fixed installations where you wish to mount the Expedition Pro to a ceiling, use the
OmniMount model 100-STMP mount, as shown in the illustration below:
In fixed installations where you wish to mount the Expedition Pro from a wall, use the
OmniMount model 100-WB mount, as shown in the illustration below:
Top of Expedition Pro with MP 1030 mount-
ing bracket installed.
Installing the MP 1030 mounting
bracket (top view)
ENGLISH
14
To Next Page
Loading...
