RESOLV 50a Control Panel - continued
The VOLUME control is used to adjust the overall output level of the RESOLV 50a. When operating the
unit for the first time, start with the VOLUME control set all the way off. Slowly raise the VOLUME control
to reach a comfortable listening level.
The RESOLV 50a features two input connectors providing easy installation with a variety of audio devices like
recording consoles, hard disk recorders, CD players and computer sound cards, to name a few. The following
section details the RESOLV 50a’s input connectors. In addition, there is a detailed cable-wiring diagram on
accepts unbalanced signals used to
connect signals from unbalanced,
1/4-INCH PHONE AUDIO INPUT
balanced, TRS (Tip, Ring, Sleeve) 1/4-
inch phone jack is used to connect
balanced or unbalanced line level
ENGLISH
DESIGNED AND ENGINEERED IN
THE UNITED STATTHE UNITED ST
S/N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
115-230 vac ó 50Hz/60Hz 175W
POWER
RATING
GNETICALLY SHIELDED GNETICALL
EXTREMELY HIGH SOUND EXTREMEL
PRESSURE LEVELS. USE CAPRESSURE LEVELS.
10
-27
-21
-15
-9
0
5
100
1K
10K 30K
FREQUENCY (Hz)
CROSSOVER
dBr