5RTE 2 Bluetooth
®
Headphones
Charging the battery
The RTE 2 headphones contains a battery capable of up to 14 hours
of usage. Although the headphones battery will come partially charged
from the factory, it is recommended to fully charge the battery before
using the headphones. To charge the battery, the headset has to be
connected with the included USB cable.
1. Connect the micro-USB plug into the USB port in the right side
of the headphones.
2. Plug the large end in the USB port of the computer or USB
5-volt adapter.
3. While the battery is charging, a constant green light will illumi-
nate on the right side of the headset. Once the battery is fully
charged, the green indicator light will turn off.
Note: When not in use, the battery will slowly self-discharge. If you
are planning not to use the headphones for a long period of time, it is
advised to partially discharge the unit and store in a cool place. Never
leave your headphones in a hot environment, especially exposed to the
sun.
To Next Page
Loading...
Need help?
General
