7RTE 2 Bluetooth
®
Headphones
Connecting with an NFC
Bluetooth
device
Near Field Communication (NFC) is a protocol that allows you to connect your RTE 2
headphones to your Bluetooth device with NFC technology simply by touching the device
or bringing the device into close proximity.
1. Enable the NFC function on your Bluetooth device.
2. Gently touch your music device on the RTE 2’s NFC detection area (located on the
center of the left ear-cup).
3. Your music device should now recognize the signal from the headset.
Note: If the music device and the headset are pairing for the first time, you will need
to accept the pairing on the music device.
4. When the signal has been accepted on your music device, the headset will be paired
and ready for use.
To Next Page
Loading...
