23
Specifications
Power Amp Section:
Normal Limit
Rated Output Power (per channel)
(1% THD @ 1 kHz stereo, 4 ohm) 275 watt 250 watt Min
Maximum Voltage Gain
Amp In to Speaker Out (@ 1 kHz) 27.5 dB 28 dB ±
Total Harmonic Distortion (20 Hz to 20 kHz with 30 kHz LPF)
0.02% 0.1% Max
Frequency Response (±3 dB) DC ~ 130 kHz 20 ~ 50 kHz
Signal To Noise Ratio (with 30 kHz LPF) 112 dB 105 dB Min
Residual Noise ((with 30 kHz LPF) -84 dBu -80 dBu Max
Idle Current across Emitter Resistor) 6 mA 15 mA Max
DC Offset Voltage +5 mV ±30 mV Max
General:
Dimensions (W x D x H) 482 x 280 x 178 mm
19 x 11 x 7 in
Weight 34.8 lb • 15.8 kg
Power Requirements 115 V ac 60 Hz for UL and CSA Version
230/240 V ac 50/60 Hz for BSI and Central Europe Version
100 V ac 50/60 Hz for Japan Version
Power Consumption 982 w
To Previous Page
Loading...
