Samson SE10x - Connector Cables

4
To connect the cable to the Earset:
• Choose the right cable and connector that
works with your wireless system.
• Line the cable up to the threaded terminal on
the back of the SE10x and screw the cable
into the Earset. Do not over-tighten the cable.
Connector Cables
The SE10x includes four cables with adapters for some of the most popular wireless microphone
beltpack transmitters.
3.5mm Connector
Works with Sennheiser
®
wireless systems
Hirose
®
4-Pin Connector
Works with most Audio-Technica
®
wireless systems
Switchcraft
®
TA3F Connector
Works with Samson AirLine ATX Series, Concert Series and most AKG
®
wireless systems
Switchcraft
®
TA4F Connector
Works with most Shure
®
wireless systems