2
XM410 Features
The Samson XM410 Powered Mixer is a comprehensive, all-in-one mixer / power amplifier solution for live
sound applications. Here are some of its main features:
• Six channel powered mixer in ergonomically correct kickback enclosure allowing you to easily see and
operate the front panel functions.
• Six Mic / Line inputs with 1/4-inch phone and XLR connectors.
• 2 x 200 Watts, or 200 Watt Main / 200 Watt Monitor, or 400 Watts Bridged power operating modes.
• A built-in, 24-bit DSP (Digital Signal Processor) with 100 selectable presets including Reverb, Delay
and Chorus, offers dazzling studio quality effects.
• Dynamic or condenser microphones connect easily to the low noise mic pre-amps with available 48
Volt Phantom Power.
• The 3-Band EQ on each channel enables you to tailor the tonal response for each input.
* Two Auxiliary sends on each channel for building an independent mix to send to the DSP effects and
monitors.
• 7-band Graphic Equalizer for the Main mix, allowing the system to be set-up for maximum gain before
feedback.
• A convenient Tape / CD Input is provided so you connect a stereo device for accompaniment or back-
ground music.
• Brilliant sound quality from the advanced circuit design, utilizing low noise operational amplifiers.
• Durable ABS plastic enclosure is road tough insuring reliable performance from night to night and
venue to venue .
• Convenient oversize, sure grip handle make the unit easy to carry.
• Three-year extended warranty.
To Next Page
Loading...
