Samson MDR1064 User Manual

MDR Series Mixers
TEN CHANNEL MIXER

Samson MDR1064 Specifications

General

Total Harmonic Distortion (THD)	0.007 %
Power consumption (typical)	15 W

Weight and Dimensions

Depth	304 mm
Width	344 mm
Height	71 mm
Weight	3100 g

Summary

Important Safety Instructions

Front and Rear Panel Controls

Front Panel Controls

Detailed descriptions of the front panel controls and connectors (items 1-36).

Rear Panel Controls

Detailed descriptions of the rear panel controls and connectors (items A-C).

Mono/Stereo Input Channel Controls

Gain Control

Channel Equalizer

3-band EQ for independent adjustment of high, mid, and low frequencies.

Aux Send 1

Aux Send 2

Master Section Controls

Main Level and Phones/CR Controls

Master Section Output and 2-Track Connections

Main Mix and Control Room Outputs

Connects main mix to amplifiers/speakers and control room to monitors.

2-Track Inputs and Outputs

Basic Operation and Setup

Connecting Audio Sources

Steps for connecting microphones and instruments to the mixer.

Setting Input and Output Levels

Guides for setting gain, main, and channel levels for optimal signal.

Using EQ and Powering On

Sending Monitor Mixes

Monitor Mix Setup

Using the AUX 1 send to create independent monitor mixes for musicians.

Channel Insert Jack Usage

Connecting External Processors

Using insert jacks to connect external effects like compressors.

Using External Effects Processing

Connecting External Effects via AUX 2

Using the AUX 2 bus to interface external effect processors.

Playing Back Audio Sources

CD/Tape/MD Playback via 2T Input

Playing back audio from CD, Tape, or Mini Disk players.

Recording the Main Mix via 2T Output

Live Sound System Setup Example

Recording System Setup Example

MDR1064 Technical Specifications

Input Channel Specifications

Details for mono and stereo input channels, including frequency response and distortion.

Impedance and Equalization Specs

Main Mix, Power, and Physical Specs