Samson MDR1064 - MDR1064 Technical Specifications; Input Channel Specifications; Impedance and Equalization Specs; Main Mix, Power, and Physical Specs

MDR1064 Specifications
18
Mono input channels
Microphone input electronically balanced, discrete input con-
figuration
Frequency response 10Hz to 45kHz
Distortion (THD & N) 0.005% at 4dBu, 1kHz
Gain range 0dB to +40dB (MIC)
SNR (Signal to Noise Ratio) 105dB
Line input electronically balanced
Frequency response 10Hz to 45kHz
Distortion (THD & N) 0.005% at 4dBu, 1kHz +
Sensitivity range -10dBu to +30dBu
Stereo input Channels
Line input Balanced
Frequency response 10Hz to 45kHz
Distortion (THD & N) 0.005% at +4dBu, 1kHz
Impedances
Microphone input 4.5k Ohm
Channel Insert return 2.5k Ohm
All other inputs 14.8k Ohm or greater
Tape out 1k Ohm
All other output 120 Ohm
Equalization
Hi shelving +/- 15dB @12kHz
Mid bell +/- 15dB @2.5kHz
Low shelving +/- 15dB @80Hz
Low Cut filter 75Hz, 18dB/oct.
Main Mix Section
Noise (Bus noise) Levels full down: -100dBr (ref.:+4dBu)
Level set to 0 dB: 90dBr (ref.:+4dBu)
Max output +22dBu balanced XLR,
22dBu unbalanced, 1/4" jacks
AUX Return gain range
∞ to +15dB
AUX Sends max out +22dBu
Power Consumption 15W
Power supply (AC/AC Adaptor)
Main voltage USA/Canada 108 - 132V, 60Hz
Europe 210 - 230V, 50Hz
U.K./Australia 240V, 50Hz
Physical
Net weight 6.8 lb. (3.1Kg)
Shipping weight 8.8 lb. (4.0Kg)
Dimension (W D H) 12.2” x 12.5” x 2.8” (310mm x 318mm x
70mm)