How to fix flickering horizontal bars on Samsung 3 SERIES?
If horizontal bars appear to flicker, jitter, or shimmer on the image of your Samsung LCD TV, adjust the Coarse tuning and then adjust the Fine tuning.
Why is closed captioning not working on my Samsung 3 SERIES LCD TV?
If Closed Captioning is not working on your Samsung LCD TV, and you are using a Cable/Satellite box, you must set Closed Captioning on the box, not your TV.
Why is the picture rolling vertically on my Samsung LCD TV?
If the picture on your Samsung LCD TV rolls vertically, check all wire connections.
How to stabilize vibrating image on Samsung 3 SERIES LCD TV with PC input?
If the image is not stable and appears to vibrate when you have a computer connected to the PC input on your Samsung LCD TV, and the setting is not correct, use your computer utility program to change the display settings.
Why does the “Resets all settings to the default values” message appear on my Samsung 3 SERIES?
If the “Resets all settings to the default values” message appears on your Samsung LCD TV, it is because you pressed and held the EXIT button for a while, resetting the product settings to the factory defaults.
Why does my Samsung LED TV turn off by itself?
If your Samsung LED TV turns off automatically, here are a few things to check: 1. Make sure the Sleep Timer is set to Off in the System menu. 2. If a PC is connected to the TV, review the PC's power settings. 3. Confirm the AC power cord is securely plugged into both the wall outlet and the TV. 4. If watching TV from an antenna or cable connection, the TV might turn off after 15-60 minutes due to no signal. To prevent this, go to System > Eco Solution > No Signal Power Off > Off.
What to do if there is no picture on Samsung LED TV?
If there is no picture or video on your Samsung LED TV, try these steps: * Check all cable connections by removing and reconnecting them to both the TV and any external devices. * Ensure that the video outputs of your external devices (like Cable/Sat Box, DVD, Blu-ray players) match the TV input connections; for example, HDMI output should connect to an HDMI input. * Confirm that all connected devices are powered on. * Select the correct input source by pressing the SOURCE button on your remote control. * Try rebooting the connected device by unplugging its power cable, then plugging it back in.
How to fix a Samsung LED TV that won't turn on?
If your Samsung LED TV won't turn on, start by ensuring the AC power cord is securely plugged into both the wall outlet and the TV. Next, verify that the wall outlet is functioning correctly. If it still doesn't turn on, try pressing the POWER button on the TV itself to rule out a remote control issue. If the TV then turns on, the problem lies with the remote. Refer to 'Remote control does not work' for further assistance.
Why did my Samsung LED TV turn on by itself?
If your Samsung LED TV turned on by itself after being off for about 45 minutes, this is normal behavior. The TV uses the OTA (Over The Air) function to automatically update firmware downloaded while you were watching TV.
What to do if my Samsung 3 SERIES LCD TV won’t turn on?
If your Samsung LCD TV won’t turn on, ensure that the wall outlet is working.
General| Series | 3 Series |
|---|---|
| Type | LCD TV |
| Display Type | LCD |
| Refresh Rate | 60 Hz |
| Built-in Wi-Fi | No |
| Smart TV | No |
| Screen Size | 32 inches |
| HDMI Ports | 2 |
| USB Ports | 1 |
Safety icons and warnings for handling the product to prevent injury or damage.
Step-by-step visual guide for installing the TV stand for different model series.
Detailed explanation of each button on the standard remote control and its function.
Guide on connecting a PC using HDMI or HDMI to DVI cables for display.
Provides solutions for common issues like picture quality, distorted images, wrong colors, and frozen screens.
Crucial safety instructions and steps for securing the TV to a wall to prevent falling.
Detailed terms and conditions of the product warranty, including limitations and exclusions.
To Next Page
