Description Picture Description Screws
5. Disconnect from the Main board the six
(6) cables (marked with blue circles in
the right gure), and then remove the
nine (9) screws (marked with red circles)
6. Remove the Main board.
Cables 9 Screws
7. DDisconnect the ve (5) cables on the
Main SMPS (marked with blue circles in
the right gure), then remove the seven
(7) screws (marked with red circles) and
remove the Main SMPS..
Cables 7 Screws
8. Remove the two (2) screws that hold the
fan in place, and remove the fan.
To Next Page
Loading...
