Samsung 320TSn-2 - Service Mode Adjustments

4-15
4. Troubleshooting
4-9. Adjustment
4-9-1. Entering Service Mode with Remote Control
Entering Service Mode
-
Power Off MUTE 1 Power On8 2
-
INFO FACTORY
(Using factory Remocon)
4-9-2. Service Mode Menu
1.
SERVICE MENU
AUTO COLOR
WHITE BALANCE
MST9788CLD
PDP LOGIC
AUDIO
YC DELAY
OPTION
SPREAD SPECTRUM
RESET
CHECKSUM
M-MG32MWWAC-0904.0
Adjusts color automatically
Adjusts color with the R/G/B offset and gain.
Adjusts screen quality and clearness.
Applies the spread spectrum.
Resets to the factory default.
The serial number (four digits) of Micom code
The version of Micom code.
Adjusts the synchronization of video and voice.
Adjusts the synchronization of Y and C.
Displays the internal logic information
(version, temperature) of the PDP.
Sets the baud rate, whether to operate nMFM,
whether to operate the fan, the temperature settings,
and the long cable connection option.