PC analog Only (1024x768@60 16gray pattern)
Color control operates normally only in certain modes
of certain patterns, but in other cases, the operation
may distort color. Also, color control is not normal when
controlling color in a mode other than XGA 60Hz.
Extreme caution needed.!!
AV Only (Check board pattern)
Color control operates normally only in certain modes of
certain patterns, but in other cases, the operation may
distort color.
Extreme caution needed.!!
Used for color control.
But excessive setting may saturate the color.
Extreme caution needed.!!
Register value in the Scaler
RED / BLUE / GREEN
Adjust the Gain and Offset
On: Display factory
adjusting value
Off: Display default
setting value
AutoColor Part
White Balance Part
To Next Page
Loading...
