Description Picture Description Screws
6. Disconnect from the Main board the
seven (7) cables (marked with blue
circles in the right gure), and then
remove the nine (9) screws (marked
with red circles).
7. Remove the Main board.
Cables
9 Screws
8. DDisconnect the six (6) cables on the
Main SMPS (marked with blue circles in
the right gure), then remove the nine
(9) screws (marked with red circles) and
remove the Main SMPS.
Cables
9 Screws
9. Remove the three (3) screws that hold
the fan in place, and remove the fan.
FAN
3 Screws
10. Remove the four (4) screws (marked
with red circles in the right gure), and
remove the bracket.