Note
Tint function can be available just in NTSC system.
Color Tone
MENU → → ENTER → → → → ENTER →
→ , → ENTER
The color tones can be changed. The individual Color components are also user adjustable.
1. Off
2. Cool2
3. Cool1
4. Normal
5. Warm1
6. Warm2
Note
If you set the Color Tone to Cool2, Cool1, Normal, Warm1, or Warm2, the Color Temp
function is disabled.
Color Temp.
MENU → → ENTER → → → → → ENTER →
→ , → ENTER
Color temp is a measure of the 'warmth' of the image colors.
Note
This function is only enabled if the Color Tone is set to Off.
Size
MENU → → ENTER → → → → → → ENTER →
Adjusting the LCD Display
To Next Page
Loading...
Need help?
General