Samsung 5 Series - Turning the TV On and Off; Plug & Play Feature; Changing Channels

14
English
¦ Menu Items
To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTER buttons in order.
To Exit from this menu : AC Power off, and then turn on again. Any changes you made are saved.
Menu Item initial Value Description
Hospitality
Mode
Hospitality Mode Standalone
Select the Hospitality mode.
y Standalone
y Interactive
SI Vendor SI Vendor Samsung
Available in the Interactive menu only.
Select the SI Vendor.
y Samsung / OCC / MTI / Nstreams / Enseo / Cardinal /Guestek /
SeaChange
Power On
Power On
Channel EN
Last Saved
Set the default values, which will be applied when the TV is turned on.
y User Defined : Refers to the settings configured for Power On
Channel, Channel Type.
y Last Saved : Refers to the last saved settings.
Power On
Channel
3
When the TV is turned on, it switches automatically to this channel when
in Stand Alone Hospitality mode.
Channel Type ...
Channel search CABLE and AIR.
y ATV, DTV : ON-AIR
y CATV (Cable Analog TV), CDTV (Cable Digital TV) : CABLE TV
Power On
Volume EN
Last Saved
Set the default volume values which will be applied when the TV is turned
on.
y User Defined : Uses the settings configured for Power On Volume.
y Last Saved : Uses the last saved settings.
Power On
Volume
... TV will switch on at this Volume Level in Stand Alone Hospitality mode.
Min Volume 0 Minimum Volume Level user can set in Stand Alone Hospitality mode.
Max Volume 100 Maximum Volume Level user can set in Stand Alone Hospitality mode.
Power On
Source
TV Select the input source the TV displays when it is turned on.
Power On
Option
Last Option
Determines the TV's state when power returns after a power failure or
after you have unplugged the TV and then plugged it in again.
- LAST OPT: Returns to its last Power state. If it was in Stand-by, it
returns to Stand-by. If it was on, it turns on.
Channel
Channel Setup You can use the Channel menu option in the OSD.
Channel Editor Edit channel numbers and names.
Dynamic SI ON
y On : Check the DTV Program channel number. (DTV channel editor
is inaccessible)
y Off : No check of the DTV Program channel number. (DTV channel
editor is accessible, but additional channel program number update
is not supported)
Menu OSD
Picture Menu
Lock
OFF Enable or disable the Picture Menu.
Menu Display ON
y On : Main Menu displays.
y Off : Main Menu does not display.