To Next Page
Z
zwatkinsJul 26, 2025
Why is Anynet+ not working on my Samsung 5+ 550 Plasma TV?
- MMichael WilliamsJul 26, 2025
If Anynet+ is not working on your Samsung Plasma TV, first ensure that the device you are trying to connect is an Anynet+ compatible device, as the system only supports these devices. Also, only one receiver (home theater) can be connected. Check that the Anynet+ device's power cord and Video/Audio/HDMI cables are properly connected. Verify that Anynet+ (HDMI-CEC) is set to 'On' in the Anynet+ setup menu and that your TV remote control is in TV mode and is Anynet+ compatible. Note that Anynet+ may not function during certain operations like searching channels or initial setup. If you've reconnected the HDMI cable, rescan for devices or power cycle your TV. Finally, confirm that the Anynet+ Function of the Anynet+ device is enabled.
General
