Samsung Series 5+ 550 - Setting Up Anynet+; Anynet+ (HDMI-CEC) Enable;Disable; Auto Turn Off Function

▶ ◀ ▶
English
❑
Setting Up Anynet+
O
MENU
m
→
System
→
Anynet+ (HDMI-CEC)
→
ENTER
E
■
Anynet+ (HDMI-CEC) (Off / On)
To use the Anynet+ Function, you must set Anynet+ (HDMI-CEC) to On.
N
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related
operations are deactivated.
■
Auto Turn Off (No / Yes)
Set an Anynet+ Device to turn off automatically when the TV is turned off.
N
If Auto Turn Off is set to Yes, running external devices will turn off at the same
time as the TV turns off.
N
Auto Turn Off may not be enabled depending on the device.