●
Equalizer
The Equalizer displays a series of sliders. Use the up and down arrow keys
to select a slider. Use the left and right arrow keys to change the slider’s
value. To Reset the Equalizer, select Reset and press ENTER
E
, then press
ENTER
E
again. To exit, select Close, and then press ENTER
E
. Equalizer is
available in the standard sound mode only.
●
Balance L/R: Adjusts the balance between the right and left speaker.
●
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
volume level of specific bandwidth frequencies.
●
Reset: Resets the equalizer to its default settings.
To Next Page
Loading...
