Samsung Series 5+ 550 - WPS(PBC) Network Setup; How to Set Up Using WPS(PBC)

▶
◀ ▶
English
■
WPS(PBC) Network Setup
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps:
1. Go to Network Settings screen. (MENU
m
→
Network
→
Network Settings
→
ENTER
E
).
2. Select the WPS(PBC) and press ENTER
E
,
then press ENTER
E
again.
3. Press the WPS(PBC) button on your router
within 2 minutes. Your TV automatically
acquires all the network setting values it needs
and connects to your network.
4. The network connection screen appears, and network setup is done.
● The displayed image may differ depending on the
model.
U
Move
E
Enter
R
Return
Network Settings
Select a network connection type.
Wired
Wireless(General)
WPS(PBC)
One Foot
Connection
Connect to the Access Point easily by pressing the
WPS(PBC) button. Choose this if your Access Point
supports Push Button Configuration(PBC)