6
English
7 DIGITAL AUDIO OUT (OPTICAL): Connects to a Digital Audio component.
8 ANT IN
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver
9 PC / DVI AUDIO IN: Connect to the audio output jack on your PC.
0 EX-LINK : Connect this jack to the jack on the optional RJP (Remote Jack Pack). This will allow you to connect external
devices (Camcoder, PC, DVD players etc) easily.
! HDMI IN 1 (DVI), 2, 3: Connects to the HDMI jack of a device with an HDMI output.
✎
No sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio and video.
✎
Use the HDMI IN 1 jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter
(DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio.
@ DATA
– Used to support data communication between the TV and the SBB.
– Connects using RJ-12 TV type plugs.
# AV IN2
– Connect a VIDEO cable to an appropriate external A/V device such a VCR, DVD, or Camcorder.
– Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on the A/V
device.
To Next Page
Loading...
