Samsung 5500 Series - PC Display Modes (D-Sub and HDMI;DVI Input); Changing the Input Source; How to use Edit Name

PC Display Modes (D-Sub and HDMI/DVI Input)
Optimal PC resolution is 1920 x 1080@60Hz. You can also select one of the standard resolutions listed in the Resolution
column. The 1V will automatically adjust to the resolution you choose .
•
:'~",i8C,;;'t'·
AeIoIutlon
"~
• "," VertIc:8I ','~CtoCk
I,
IVI"
IBM
640 x 350 31.469 70.086
25.175 +f-
720 x 400 31.469
70.087
28.322 -f+
640 x 480 35.000
66.667 30.240
-f-
MAC
832 x 624 49.726 74,551
57.284
-f-
1152x870 68.681
75,062
100.000
-f-
640 x 480 31.469 59.940
25.175
-f-
640 x 480 37.861
72.809 31.500
-f-
640 x 480
37.500
75.000
31.500
-f-
800 x 600 37.879 60.317
40.000
+f+
800 x 600 48.077 72.188 50.000
+f+
800 x 600 46.875 75.000
49.500
+f+
1024 x 768 48,363
60.004 65.000
-f-
1024 x 768 56.476 70.069 75,000 -f-
1024 x 768
60,023
75.029 78.750
+f+
VESADMT 1152x864 67,500 75,000
108,000
+f+
1280 x 1024 63.981
60020 108,000
+f+
1280 x 1024
79.976
75.025
135,000
+f+
1280 x 800 49.702
59.810
83.500 -f+
1280 x 800
62.795 74.934 106.500
-f+
1280 x 960 60.000
60.000 108.000
+f+
1360 x 768 47,712
60.015 85.500
+f+
1440 x 900
55.935 59.887
106.500 -f+
1440 x 900 70.635
74.984 136,750
-f+
1680 x 1050 65.290 59.954
146.250
-f+
VESA DMT f DTV CEA
1920 x 10800 67.500 60.000
148.500
+f+
~NOTE
• For HOMI/OVI cable connection, you must use the HDMIIN 1 (DVI) jack.
• The interlace mode is not supported.
•
The set might operate abnormally if you select a non-standard video format.
• Separate and Composite modes are supported. SOG (Sync On Green) is not supported.
EX-LINK
II
Connector for service only.
Changing the Input Source
Source
Use to select 1V or an external input
source such as a OVO player I Blu-ray
player / cable box I STB satellite receiver.
1. Press the SOURCE button on your
rernote.
2. Select a desired external input source.
• TV I PC I AV I Component I
HDMI1/DVII HDMI21 HDMI3 I
HDMI4 I USB I AIIShare
~ You can only choose external devices that are
connected to the TV. In the Source, connected inputs
will be highlighted.
~ If you want to see connected devices only, move to
Connected using ..... or ~ button.
~ PC always stay activated.
~ If the connected external devices are not highlighted,
press the red button. The TV will search for connected
devices.
How to use Edit Name
Edit Name lets you associate a device name to an input
source. To access Edit Name, press the TOOLS button In
Source. The following selections appear under Edit Name:
• VCR I DVD I Cable STB I Satellite STB I PVR STB I
AV Receiver I Game I Camcorder I PC I DVI PC I DVI
Devices I TV I IPTV I Blu-ray I HD DVD I DMA: Narne
the device connected to the input jacks to make your
input source selection easier.
~ If you have connected a PC to the HDMIIN 1 (DVI)
port with an HOMI cable, select PC under Edit Name
to enter a device name.
~ If you have connected a PC to the HDMI IN 1 (DVI)
port with an HOMI to OVI cable, select DVI PC under
Edit Name
to enter a device name.
~ If you connected an AV device to the HDMIIN 1 (DVI)
port with an HOMI to OVI cable, select DVI Devices
under mode under Edit Name to enter a device name.
Information
You can see detailed information about the selected external
device.