25
English
USB Cloning
Picture, Sound, Channel, Setup, and Hotel Setup)
from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you
✎ After cloning, certain features are applied when the TV is turned on again.
Cloning TV to USB: Copies stored menu settings from a TV to a USB device.
1. Insert a USB drive into the USB port on the rear of the TV.
2.
MUTE119SelectE
3. Press the u or dCl one: TV to USB, and press the
SelectE
4. Clone: TV to USB is displayed. Press the SelectE
5. The TV displays one of the following messages:
Completed: Copy was successful.
Failed: Copy was not successful.
No USB: USB is not connected.
✎ The cloned values include the values on the Guest side menu
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
Cloning USB to TV: Copies menu settings and channel data in a USB device to a TV.
✎ Shortcut: Turn the TV off, insert the USB device, turn the TV on, and then press the SelectE
To clone data to the TV using the Hotel menu, follow these steps:
1. Turn the TV off.
2. Insert the USB drive into the USB port on the rear of the TV.
3. Turn the TV on.
4.
MUTE119SelectE
5. Press the u or d
SelectE
6. The message Clone: USB to TV is displayed. Press the SelectE
7. The TV displays one of the following messages:
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
Completed: Copy was successful.
Failed: Copy was not successful.
No USB: USB is not connected
No File
✎
page.
Pre-condition for cloning (check point)
–
–
To Next Page
Loading...
