28
English
Multi Code Remocon
A Multi Code Remocon is a special remote which is designed to control multiple TVs.
This function is useful where there is more than one TV in a location.
displayed on each TV's OSD.
The Initial ID code for each TV is “0”.
–
–
– To set a TV's ID code, follow these steps:
1. Aim the remote at the TV, and then press the MUTERETURN
2.
Remote control code is set to 0. If you want to
change Remote control code, enter the digit you
want to change.
displays the following message: “Remote control code is changed to 1”
– To reset the ID code, press the MUTEEXIT
0.” appears on the TV
To Next Page
Loading...
