Samsung AC***MNADKH - Using the Turbo Function

24
English
Installation
Example : When installing DPM ( 1 Outdoor unit with 4
indoor units)
Condition SEG 14 Setting
Result
External
control
Level control Indoor 1 Indoor 2 Indoor 3 Indoor 4
Default
Not set (0) Slave (All)
Disuse Use 4 Not set (0) Not set (0) Not set (0)
Master (Indoor 1),
Slave (Indoor 2,3,4)
Use (Indoor 3) Disuse Not set (0) Not set (0) 1~3 Not set (0) Slave (All)
Use (Indoor 4) Use Not set (0) Not set (0) Not set (0) 5~7
Master (Indoor 4),
Slave (Indoor 1,2,3)
Changing the addresses and options individually
You can change each digit of set option.
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
The option mode
you want to change
The tens’ digit of an
option SEG you will
change
The unit digit of an
option SEG you will
change
The changed value
Indication
and Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
0 D
Option
mode
0~F
Tens’ digit
of SEG
0~9
Unit digit
of SEG
0~9
The
changed
value
0~F
NOTE
• When changing a digit of an indoor unit address
setting option, set the SEG3 as ‘A’.
• When changing a digit of indoor unit installation
option, set the SEG3 as ‘2’.
Example) When setting the 'buzzer control' into disuse
status.
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
The option mode
you want to
change
The tens’ digit of
an option SEG you
will change
The unit digit of
an option SEG you
will change
The changed
value
Indication 0 D 2 1 7 1
Setting an indoo r unit address and installation option