22 English
Advanced Operation
When the air conditioner is operating in Cool mode;
1. Press the
button to select .
• The
(
)
indicator will keep blinking and you can set the
time.
2. Press the or button to set the time.
• You can set the time in half hour intervals from
30minutes (0.5 on the display) to 3 hours and in hour
intervals from 3 to 12 hours.
• The time can be set from minimum 30minutes to
maximum 12hours.
• The default time value for the good'sleep mode is
8hours.
3. Press the button to complete the good'sleep mode
setting.
• The ( ) indicator and the set time of the good'sleep
mode will be displayed on the remote control display.
• The good'sleep mode will be cancelled if you don't press
the
button within 10seconds after setting the time.
Therefore, check for the ( ) indicator on the remote
control display.
Cancel
Press the
button ► select ( ) ► press
the or button ► set the timer to ►
press the button
Remote control display
Additional options available in good'sleep mode
The temperature can be adjusted by 1°C (1°F) within the range of
18°C (65°F) to 30°C (86°F).
Setting the good’sleep mode