25English
Advanced Operation
When the air conditioner is turned on
1. Press the
button.
2. Press the
, or button until the
( )
indicator starts blinking.
3. Press the
button to set the Purity function.
• (
) ( ) indicator will be displayed on the remote
controller display and Virus Doctor function will begin.
Cancel
Press the
button ► press the , or
to make the
( ) i
indicator blink and press
the button.
NOTE
• You may select the purity function additionally during Auto/
Cool/Dry/Heat mode and you can adjust the temperature.
• If the purity function is selected additionally in fan mode, the
temperature cannot be adjusted.
• When the air conditioner and the purity function are turned
on simultaneously and you press the Power button, both air
conditioner and purity function will stop operation.
• You can still use the purity function when the On timer is set
with the air conditioner is turned off.
• There will not be much difference on energy consumption
and operating noise when the purity function is selected
additionally while the air conditioner is turned on.
Remote control display
Purity function will remove harmful materials in the air to provide you clean and healthy environment.
You can select this function additionally while the air conditioner is in operation.
Using the Purity function
To Next Page
Loading...
